Installation Sheet

1
2
4
2
CERTIFICATION: cULus DRY NO. 52205LEDDLP
3
PREPARE THE FIXTURE AND CONNECT THE
WIRES
If there is an existing fixture remove it.
Determine the desired hanging height and secure the
included rods to the canopy and fixture.
Carefully pass the fixture wires through the rods to the canopy.
Expose the supply wires from the outlet box.
ATTACH MOUNTING BRACKET AND MAKE
WIRE CONNECTION
Attach the mounting bracket to the J-box with the supplied
screws. Connect the black supply wire to the black fixture
wire. Secure with the supplied wire nuts. Connect the white
supply wire to the white fixture wire. Secure with the supplied
wire nuts. Attach the green J-Box wire around green
hexagonal head screw or connect it to the green supply
grounding wire of the fixture. Secure all wire with electrical
tape (not supplied). Tuck all wires carefully into the J-Box.
Align the canopy to the mounting bracket and all-thread
and secure with the supplied thumb screw.
INSERT THE BULBS
Insert the bulbs.
Align the decorative lamp rings onto the bulbs and secure
with the supplied screws.
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL.
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that might exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
VER: 20.01.1