Installation Sheet

CERTIFICATION: ETL DRY NO.52120

MAKE WIRE CONNECTIONS

Gently pull the supply wires through the hole in the

crossbar. Connect the black supply wire to the black

fixture wire. Secure with the supplied wire nuts.

Connect the white supply wires to the white

fixture wire. Secure with the supplied wire nuts. Either

wrap the green wire around one of the protruding screws

or connect it to the supply ground wire. Secure all wire

with electrical tape (not supplied).

Tuck all wires carefully into the J-Box.

MOUNT FIXTURE TO THE CROSSBAR PLATE

Position the canopy over the crossbar plate.

Align the hole in the center of canopy and secure with the

supplied thumb screws.

SECURE THE GLASS AND CRYSTAL BEADS

SHADES

Hold the glass and crystal beads shades to the fixture

and fitting over the socket. Secure with the supplied

socket rings.

Do not overtighten the socket ring to ensure that the

glass does not crack.