Installation Sheet

2
4
2
CERTIFICATION: ETL DRY NO. 50466LEDD
3
MAKE WIRE CONNECTIONS
Connect the black supply wire to the black wire
on the driver. Secure with the supplied wire nut.
Connect the white supply wire to the white wire
on the driver.
Secure with the supplied wire nut. Either wrap the
green wire around one of the protruding screws or
connect it to the supply ground wire. Secure all wire
with electrical tape (not supplied).
Tuck all wires and driver carefully into the J-Box.
MOUNT FIXTURE TO THE CROSSBAR
AND SECURE GLASS SHADES
Place the canopy to the crossbar. Align the holes in
the sides of canopy and secure with the supplied
screws.
Install the side and bottom glass shades and secure
with the supplied screws.
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
L