Installation Guide

PREPARE THE FIXTURE

If there is an existing fixture remove it.

Expose the supply wires from the J-box.

Install the crossbar plate and mount it to the J-Box

with the supplied screws.

WHAT YOU NEED

•

Screwdriver

• Wire Cutters

• Wiring Supplies as Specified

by Electrical Code

CERTIFICATION: cULus DAMP NO.

50009LEDD

CONNECT THE WIRES AND MOUNT THE

FIXTURE

Install the mounting plate and secure with the supplied

screw nuts. Gently pull the supply wires through the

hole in the crossbar and mounting plate. Connect the black

supply wire to the black fixture wire. Secure with the supplied

wire nuts. Connect the white supply wire to the white fixture

wire. Secure with the supplied wire nuts. Attach the green

J-Box wire around green hexagonal head screw or connect

it to the green supply grounding wire of the fixture. Secure

all wires with electrical tape (not supplied). Tuck all wires

carefully into the J-Box.

MOUNT THE FIXTURE

Align the side holes of fixture and mounting plate.

Secure with the supplied screws.

RESTORE THE ELECTRICITY AND

CHECK THE OPERATION OF YOUR

NEW ACCESS LIGHTING FIXTURE

If the fixture is to be removed or replaced,

please ensure that the electricity is

switched off and that the fitting is cool

before touching it.

CAUTION

VER: 19.01.1