Installation Sheet

ATTACH MOUNTING BRACKET AND

MAKE WIRE CONNECTION

If there is an existing fixture remove it. Expose the

supply wires from the J-box. Mount the mounting bracket

to the J-box with the supplied screws. Gently pull the

supply wires through the hole in the mounting bracket.

Connect the black supply wire to the black fixture wire.

Secure with the supplied wire nuts. Connect the white

supply wire to the white fixture wire. Secure with the

supplied wire nuts. Attach the green J-Box wire around

green hexagonal head screw or connect it to the green

supply grounding wire of the fixture. Secure all wires

with electrical tape (not supplied).

Tuck all wires carefully into the J-Box.

ATTACH THE FIXTURE TO THE

MOUNTING BRACKET

Align the fixture to the mounting bracket and secure with

the supplied screws. Place the glass plate onto the

center screw and secure with the supplied washer and

hex-nut. Gently bend the acrylic into the fixture body.

WARNING: DO NOT RESTORE ELECTRICITY AND USE THIS

FIXTURE BEFORE THE GLASS SHADE IS INSTALLED

WHAT YOU NEED

•

Screwdriver

• Wire Cutters

• Wiring Supplies as Specified

by Electrical Code

CERTIFICATION: cULus DAMP NO.

49980LEDD/49981LEDD

RESTORE THE ELECTRICITY AND

CHECK THE OPERATION OF YOUR

NEW ACCESS LIGHTING FIXTURE

If the fixture is to be removed or replaced,

please ensure that the electricity is

switched off and that the fitting is cool

before touching it.

CAUTION

VER: 19.12.1