Installation Sheet

WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
3
CERTIFICATION: CETL DAMP
NO. 23922
5
7
SECURE THE CRYSTAL SHADE
Hold the crystal shade to the fixture by fitting
the crystal over the socket. Secure the crystal
by screwing onto the threads on the socket.
INSERT THE BULBS
Insert the supplied bulbs.
MAXIMUM WATTAGE 60W.
DO NOT EXCEED THE WATTAGE AS STATED
ON THE WARNING LABEL AND IN THE INSTRUCTION
SHEETS
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that might exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS FIXTURE
6