Installation Guide
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
•
3 x 60W E-26 Bulbs (23764)
4
3
CERTIFICATION: cULus DRY NO. 23764/23764LEDDLP
5
6
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO NOT use bulbs that might exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
INSERT THE BULBS
Insert the bulbs.
DO NOT EXCEED THE MAXIMUM WATTAGE
AS STATED ON THE WARNING LABEL.
SECURE METAL SHADE
Secure the nipple to the center of the canopy. Slide the
metal shade up so that the nipple is placed through the
center hole in the metal shade. Screw the metal shade
tightly.
VER: 18.11.1