Installation Sheet

CERTIFICATION: cETLus DAMP NO.

20836LEDD/20837LEDD/20838LEDD

MAKE WIRE CONNECTION

If there is an existing fixture remove it.

Expose the supply wires from the J-box.

Connect the black supply wire to the black driver wire.

Secure with the supplied wire nuts. Connect the white

supply wire to the white driver wire. Secure with the

supplied wire nuts. Attach the green J-Box wire around

green hexagon screw or connect it to the green supply

grounding wire of the fixture. Secure all wires with

electrical tape (not supplied).

Tuck all wires carefully into the J-Box.

ATTACH MOUNTING STRAP

Install the mounting strap to the J-Box with the supplied

screws.

MOUNT FIXTURE

Align the fixture to the mounting strap and secure with the

supplied snap clips.

RESTORE THE ELECTRICITY AND

CHECK THE OPERATION OF YOUR

NEW ACCESS LIGHTING FIXTURE

If the fixture is to be removed or replaced,

please ensure that the electricity is

switched off and that the fitting is cool

before touching it.

CAUTION

VER: 19.03.1