Installation Sheet

1
2
4
2
CERTIFICATION: cETLus DAMP NO. 20834LEDD/20835LEDD
3
ATTACH MOUNTING BRACKET
If there is an existing fixture remove it.
Install the mounting bracket to the J-Box with
the supplied screws.
MAKE WIRE CONNECTION
Expose the supply wires from the J-box.
Gently pull the supply wires through the hole in the
mounting bracket. Connect the black supply wire to
the black fixture wire. Secure with the supplied wire nuts.
Connect the white supply wire to the white fixture wire.
Secure with the supplied wire nuts. Attach the green
J-Box wire around green hexagon screw or connect it to
the green supply grounding wire of the
fixture. Secure
all
wires with electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
MOUNT FIXTURE
Align the fixture to the mounting bracket.
Rotate the fixture in the indicated direction to lock it
into the mounting bracket.
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
VER: 19.03.1