Installation Sheet

1
2
4
2
CERTIFICATION: cETLus DAMP
NO. 20830LEDD/20831LEDD/20832LEDD/ 20849LEDD
3
ATTACH MOUNTING STRAP
If there is an existing fixture remove it.
Install the mounting strap to the J-Box with the supplied
screws.
MAKE WIRE CONNECTION
Expose the supply wires from the J-box.
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wire to the white fixture wire. Secure with the
supplied wire nuts. Attach the green J-Box wire around
green hexagon screw or connect it to the green supply
grounding wire of the fixture
.
Secure all wires with
electrical tape (not supplied)
.
Tuck all wires
carefully into the J-Box.
MOUNT FIXTURE
Align the fixture to the mounting strap and secure with
the supplied snap clips.
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
VER: 22.07.1