Installation Sheet

2
4
2
CERTIFICATION: cETLus DAMP NO. 20468LEDD
3
MOUNT THE FIXTURE
Mount the fixture canopy up to the crossbar.
Secure with the supplied screw knobs.
Place metal frame over the acrylic shade and hold up
to the canopy aligning the holes with the threaded rods.
Secure with the supplied nuts.
CONNECT THE WIRES AND MOUNT THE
CROSSBAR
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nut. Connect the white supply
wire to the white fixture wire. Secure with the supplied wire
nut. Either wrap the green wire around one of the
protruding screws or connect it to the supply ground wire.
Secure all wires with U.L. Certified electrical tape (not
supplied). Tuck all wires carefully into the J-Box.
Mount the crossbar up to the J-box.
Secure with the supplied screws.
Secure the additional supplied mounting plug screws
into the mounting plugs for additional support of canopy.
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
Dimmable xture - see attached list for compatible dimmer switches.