Installation Guide
2
4
2
CERTIFICATION: cETLus DAMP NO. 20464LEDD/20465LEDD/20466LEDD/20467LEDD
3
MOUNT THE FIXTURE
Mount the fixture canopy up to the crossbar.
Secure with the supplied screw knobs.
Place metal frame over the acrylic shade and hold up
to the canopy aligning the holes with the threaded rods.
Secure with the supplied nuts.
MOUNT THE CROSSBAR
Mount the crossbar up to the J-box.
Secure with the supplied screws.
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
Dimmable xture - see attached list for compatible dimmer switches.