Installation Sheet

PREPARE FIXTURE
If there is an existing fixture remove it.
Expose the supply wires from the J-box .
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nut. Connect the white supply
wire to the white fixture wire. Secure with the supplied wire
nut.
Attach the green J-Box wire around green hexagonal
head screw or connect it to the green supply grounding wire
of the fixture.
Secure all wires with U.L. Certified electrical
tape (not supplied). Tuck all wires carefully into the J-Box.
1
2
4
2
CERTIFICATION: cETLus DAMP NO. 20464LEDD/20465LEDD/20466LEDD
3
SECURE THE SHADE
Cover the acrylic shade with metal frame and align the
holes with the threaded rods. Secure with the supplied nuts.
MOUNT THE CANOPY
Fit the fixture canopy up to the J-box.
Secure with the supplied screws.
Slightly rotate the canopy to fit in screw slot.
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
If the fixture is to be removed or replaced,
please ensure that the electricity is
switched off and that the fitting is cool
before touching it.
CAUTION
Dimmable xture - see attached list for compatible dimmer switches.
VER: 18.01.1