HIGH DEFINITION DIGITAL RECEIVER FULL HD 1080p TV STAR T1010p HD USB PVR USER MANUAL ENG
CONTENTS Important Safety Instructions................................................................................................................ 3 Front and Rear Panel............................................................................................................................. 4 Remote Controle ................................................................................................................................... 5 Connecting to a Television ..................................
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Operate this product only from the type of power source indicated on the label.
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste. There are separate collection systems for recycling. For more information, please contact the local authority or your retailer where you purchased the product. Accessories Front and Rear Panel 1.Front panel 1. CH-: Change channels or items from top to bottom on the menus 2.
3. CH+: Change channels or items from top to bottom on the menus 4. REMOTE CONTROL SENSOR: used to channels without using the Remote Control 5. USB: For software upgrade and media playback 2. Rear panel 1. 2. 3. 4. 5. RF IN: Use to connect an antenna.
TIMESHIFT: Use after RECORD button for timeshift EXIT: Use this key to quit current menu. INFO: Display information about the current channel. TV/RADIO: Switch between Digital Radio and DVB-T modes. PAGE+/PAGE-: To navigate inside the menus. TIMER: Use to access ON/OFF timer directly. PVR and Multimedia keys Installation the Batteries Remove the battery cover from the rear of the Remote Control and place 2xAAA size batteries inside the compartment.
Connecting to a DVD Recorder or VRC
First time Installation After all connections have been made properly,switch on TV and make sure the unit is connected to the main Power.Press power button to switch the unit on. If you are using the unit first time or have restored the unit to Factory Default,the Installation Guide Menu will appear on you TV screen.
2. Repeat the previous step to select more channels to delete. Skip TV or Radio Channel 1. Select the chennel you would like to skip and press the GREEN button. A skip symbol is displayed. The channel is marked as a skip. 2. Repeat the previous step skip to more channels. 3. To save your settings and exit the menu, press EXIT key. Disable the Skip Channel function: Select the Skip channel and press the GREEN button on the remote control to cancel. Move a TV or Radio Program 1.
[By ONID] Sort the channels accroding to ONID (d) LCN (Logical channel number) Set LCN on or OFF if you want to sort the channels manually. Picture Setting To access the Menu,Press MENU then select [Picture] using the RIGHT/LEFT key .The Menu provides options to adjust the video settings.Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting.Press EXIT to exit the menu. (a) Resolution You can change this setting if the picture resoltion dose not apper to be correct.
If a channel is found,it is saved and added to the channels list.If channels can not be found during searching ,the unit will exit automatically. (c) Country Select your country of residence. (d) Antenna Power Enable Antenna Power if an external active antenna is connected. Time Setting To access the Menu,Press MENU then select [Time] using the RIGHT/LEFT key .The Menu provides options to adjust the time settings.Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the setting.
Set or change the password for locked programs. Enter your old password nor the default password’0000’. You will then be asked to enter your new password. Press OK button to confirm your new password. Once it is confirmed, press EXIT to exit the Menu. The master unlock password is ‘8888’’. (b) Restore Factory Default Reset you STB to the Default Factory Settings. In Main Menu select [Restore Factory Default] using the RIGHT/LEFT keys and press OK or RIGHT to select.
- Subtitle BG: [White]: Displays the subtitle in white background. [Transparent]: Displays the subtitle in transparent background. [Grey]: Displays the subtitle in grey background. [Yellowgreen]: Displays the subtitle in yellowgreen background. - Subtitle Font Color: [Red]: Displays Subtitle in red font. [Blue]: Displays Subtitle in blue font. [Green]: Displays Subtitle in green font. (d) USB PVR Configure: The most unique feature on your is its ability to record live TV.
- Some USB devices may not be properly recognized. - Even when they are in a supported format, some files may not play or display depending on the content. (e) Timeshift When you are playing the program, you can insert the USB, and at any time you can press the [Time shift] button, the frame will be paused, and you may press the [PLAY] button after a second, it will start to timeshift now.
Technical Specifications Item Tuner Video Audio Sub Item Input Frequency RF Input level Parameter 174~230MKz 470~860MKz -78~-20dBm IF Bandwidth 7MHz and 8MHz Modulation Decoder Format Output Format Output Port Decoder Format Audio Output Supported Capacity USB2.0 Power QPSK,16QAM,64QAM MPEG4 AVC/H.264 HP@L4 MPEG2 MP@ML.HL 576P , 720P, 1080i, 1080p, 4:3 ir 16:9 HDMI(V1.
