Troubleshooting guide

Rev: March 2, 2009 Access HD is a registered trademark of GXI International, LLC 6 of 7
Menus - Troubleshooting
Current time is not correct
after pressing INFO button.
On the remote, press MENU, navigate down to “Time Zone” and
choose the correct time zone that you are in (Hawaii, Alaska,
Pacific, Mountain, Central, Eastern) by hitting the
► button.
What is Auto Power Down
Timer?
The default setting from the factory is set to put the converter in
standby in 4 hours to save electricity. You may change it to 2, 4, or
disable it (Off).
The settings for “Auto Power Down Timer” stay the same even
after the unit has been put in standby mode. Leave on 1, 2, 3, or 4
to save electricity in case you forget to turn the unit to standby after
turning off the TV.
I cannot read anything, the
menus are all in Spanish
(Español).
Scroll down to “Lengua” and change it from Español to English.
I cannot read anything, the
menus are all in French
(Français)
Scroll down to “Langue de menu” and change it from Français to
English.
On the model 1010, what is
the “Smart Antenna” input
for?
That port is not used since there really isn’t anyone manufacturing
smart antennas. A quality outdoor antenna will work the better.
The “Smart Antenna” gives you the convenience of never having to
physically adjust your antenna. Using advanced technology, it
automatically seeks and locks the strongest DTV signal available,
without any manual adjustments.