User manual

Specifications
Communications Interface
•
I/O Connection: 37 Pin DBM connector.
• Serial Ports: An external breakout cable that terminates with female D-sub 9-pin
connectors.
• Character length: 5, 6, 7, or 8 bits.
• Parity: Even, odd or none.
• Stop Interval: 1, 1.5, or 2 bits.
• Serial Data Rates: Up to 115,200 baud, asynchronous, A faster range of rates, up to
460,800 baud, is achieved by jumper selection on the card. A type
16550 buffered UART is used and has FIFO buffer.
• Address: Continuously mappable within 0000 to FFFF (hex) range of PCI bus
addresses.
• Receiver Input Sensitivity: +200 mV, differential input.
• Common Mode Rejection: +12V to -7V.
• Transmitter Output Drive Capability: 60 mA, with thermal shutdown.
Environmental
•
Operating Temperature Range: 0 °C. to +60 °C.
• Storage temperature Range: -50 °C. to +120 °C.
• Humidity: 5% to 95%, non-condensing.
•
Power Required: +5VDC at 125 mA typical, -12VDC at 5 mA typical, +12VDC at 5 mA
typical, 750 mW total power consumption (four-port cards).
• Size: 12.283 inches long (312 mm).
Manual PCI-ICM-422(485)/2(4)
7