Technical information

V4 Logger User Guide 92

Special Notes:

Be sure to select “COM 1” on the SRC 32 under the Hardware device

selection on versions 2.6.1 and older. Version 2.6.7 and later of Logger

have support for multiple COM ports.

When finished, click and . Remember to restart the

Logger application so the changes will take effect.

HYPERTERMINAL

If you are unsure if your Broadcast Tools GPI 32 device is communicating

over the specified port, Hyper Terminal is a simple way to show the

communication on a specific COM port.

To use Hyper Terminal, go to the button and select Program then

Accessories, Communications, then Hyper Terminal.