Technical information

V4 Logger User Guide 90
© 2010 OMT Technologies
Reboot the computer as the COM port will need to be reinitialized through
Windows. Now you are ready to configure your Media Touch ONAIR or
Logger upon restart.
NOTE: You can also run the GPI-32 at 38,400 by changing the value in
Windows, in the Logger Configuration and by changing the DIP switches
on the GPI-32. This is available on Versions 3.X and 4.X of Logger.
If you are experiencing “lag” at the 9600 rate on closures, then increase
to 38,400.