Technical information

V4 Logger87

http://www.ftdichip.com

The CDM 2.02.04 has been verified and used in this guide.

Create a folder on the “C:\” root or convenient location to save the driver

file. Extract the file in the same folder location.

NOW YOU CAN CONNECT

Be sure to connect the USB cable and power supply to the GPI 32 while

the computer you are connecting to is “off”. Verify that the power is on

the GPI 32 device and this can be determined by the green led beside the

power cord jack.

Power up the computer and your Windows operating system should find

new hardware.

Do not allow Windows to install automatically, rather, specify a location

and point to the folder location where you have extracted the zip driver

files. Windows should now recognize the driver and install successfully.

To verify, right click “My Computer” from the desktop and double click

device manager. There should be no warnings or errors in any of the

devices listed.