Technical information
V4 Logger85
© 2010 OMT Technologies
OVERVIEW
OMT Technologies is always searching and testing the latest in cost
effective interfacing hardware with our software solutions to provide
exceptional value in your OMT software purchase. Software such as
ONAIR and Logger are powerful automation and audio solutions that are
enhanced with simple and reliable hardware interfacing devices.
The GPI 32 device from Broadcast Tools is a 32 input closure only device
capable of interfacing directly through you RS 232 COM port or through a
USB port with supplied SMART cable (USB to 9 PIN).
Installation is simple and executes the same “PIP” commands that OMT
software code for the SRC 32 Broadcast Tools device. This is a simple and
cost effective way to utilize the USB port on your ONAIR or Logger
computer and provide up to 32 input closures, especially when most new
computers are relying on USB only for external serial communication.
GPI are clearly labeled on the back of the GPI 32 showing all inputs and
common connections and are contained on two connectors with 16
closures on each. The GPI 32 allows for wall or rack mount installation.
This device is equally suited for interfacing with StarGuide II/III receivers
as there is are two DB37 ports on the back of the GPI 32 for direct
connection to the receiver.
We hope you find this guide and all other documentation available for
OMT software useful. Please contact support@omt.net for any questions
or concerns regarding the installation of this unit with your Media Touch
software.
This document is brought to you by the OMT Support Team.