Technical information

V4 Logger User Guide 82

If the first hour of the show took a 3 minute break and the second hour

took a 2 minute break, then you would create two separate feed and

schedule items to reflect the two different length breaks. I recommend

using a 2000 series cut number for two minutes, 3000 series for 3

minutes, etc.

How do I route feeds from receivers to be recorded into the iLogger?

Similar to the explanation above, you would assign a switcher/closure

device under “Configuration” from the main Logger window and

“Hardware”. If you have a BTools device, you would select the

corresponding model and assign a baud rate of 9600 on the corresponding

COM port.

Once you have configured the hardware section, you would then create a

feed under the appropriate naming convention and select the OMT

database if you wish to have the recording available for playback directly

from the audio and database server. If you do not require the recording

to be on the audio server but local to the Logger, you would select the

“Default destination”.

You can now configure the appropriate input and output along with

closures for “On Start” and “On Stop” edit buttons.