Technical information

V4 Logger User Guide 80
© 2010 OMT Technologies
If you are using a switcher device, you will also select the input channel
on that device that will be supplying the audio for that particular feed
event.
Once you have your audio input/output and closure selected, you can now
schedule the event to occur. Using your satellite provider clock or time
sheet, establish the overall length of the show you wish to record and
create a schedule item for that time under “Daily Scheduler”.
Special Notes:
IMedia Logger can support the Klotz control system, Broadcast Tools
SS4.2, SS8.2, SS16.4, ACS 8.2, SRC 32, and the GPI 32 all within the
drop down selection within the Hardware section of the Configuration
Page. You can successfully run a BTools serial device and a DIO -24H
card on the same computer. This will provide audio routing up to 16
channels and 32 input and 24 output closures between the two devices.
The Klotz control system can provide almost unlimited audio and GPI
connections based on the number of frames purchased and configured.