Technical information

V4 Logger User Guide 78

Setting up Pre-Recorded Satellite Events

Logger can pre-record Satellite show through the “split on closure”

function by assigning a switch/closure device initially with the Logger. If

you have a DIO-24H card from Measurement Computing, a Klotz control

surface system, most BTools switcher/closure devices or a serial

switcher/closure device that can accept ASCII or HEX, it can be configured

from the “Configuration” page under “Hardware”.

The above screen shot shows a PCI-24H card being enabled as the closure

device.

Once you have a valid switcher/closure device enabled, re-launch the

Logger application so it can read the new system information being

applied. Upon the restart, go to the “Feeds” section of the Logger

application and create a feed for the show you wish to record. Since the

show will be recorded directly to your OMT audio server and database,

you must select the “OMT database” as the destination under “File

properties”.