Technical information

V4 Logger71

Special Notes:

The DIO – 24H card does not require SIPS if you are providing “dry” input

closure. If you are using “logic” inputs or driving relays from sinking

output current, you will require the SIPS. The SIPS are generally 2.2K in

value and slightly higher values will work with less available current

output.

Now that the software for the DIO card is installed and the card has been

initialized, you can power off the PC and begin wiring the CIO – 37

breakout card (if supplied). The DIO card can be wired directly from the

back of the unit or wired from the CIO – 37 interface as the pin outs are

the same.