Technical information

V4 Logger User Guide 60
© 2010 OMT Technologies
1.9 Event Log
V4 Logger
Event Log:
The Event Log is your primary source for verification of recordings, closures, audio routing and error
reporting. It is highly recommended that Logger users enable all event logging previous covered
under the Logger Configuration of this guide to ensure all event logging is posted. This will assist in
troubleshooting and validation for new Logger clients.
The screen shot above shows the event log and the Logger start up sequence verifying all available
audio streams and devices while also verifying all closure and switcher devices that are configured.
When all event logging is enabled, any error message will be posted to the event log for easy
identification.
The event by default resides in the C:\Program Files\iMediaWave\iMediaLogger folder and be
configured to be written to any folder location. After several months or years of operation, it is a good
idea to “houseclean” these event logs as they can take up a great deal of space over a long period of
time. The log itself can be opened using Notepad or WordPad and is written in a .LOG format.