Technical information

V4 Logger User Guide 58

V4 Logger

Schedule Creation - Continued:

Use Schedule Split Closure Delays: This will take the time value placed under the “Split Closure”

tab of the Feeds section.

If no value has been placed in this field and the Use Schedule Split Closure Delay is enabled, it will

take the time information from the “Set Delay” Time log.

Click on the “Set Delay” button and the following time schedule will appear.

Place the desired time for the first commercial stop set/break under the Min and Sec window and click

“Add”. Continue this process following your satellite schedule clock until all required breaks (up to 16)

have been filled.

Set 0.5 EOM: This feature can be used for recording music beds and placing a 0.5 EOM on the cut

which will provide a means of having pre-recorded beds to play underneath voice or other log

scheduled content in the ONAIR. This was also useful when using Card Mapping and “slate marking”

recordings prior to having the ability to set specific closure record delay times.