Technical information

V4 Logger User Guide 50
© 2010 OMT Technologies
V4 Logger
Feed Creation - Continued:
Switcher/Serial Devices
If you have configured a BTools switcher, Klotz router, or raw serial device under the Logger
Configuration page, then it will be available under the Switcher/Serial Devices tab for selection.
To configure the Switcher/Serial Device, select the box to the right of the Switcher/Serial Device
display and select the appropriate device and audio routing assignment.
NOTE: The Switcher/Serial Device Edit screen provides two operations for both “On Start” and “On
Stop”. This eliminates additional audio routing or muting where required when ending a feed item.
An example of a two operation assignment is displayed below.