Technical information

V4 Logger47

V4 Logger

Feed Creation - Continued:

Logic for the incoming closure can be based on a “low” or “high” condition.

When you have applied the desired closure and logic, click “OK” and the result will be placed in the

Start or Stop display window.

The user can generally save on the number of required closures by selecting one closure with two

logic conditions to perform mic skimming, time based recordings, etc on a single feed.

Output Closures

Click on the box directly to the right of the Start or Stop display field to select from a list of

available and previously configured closure devices.

The parallel port (if present or enabled) is the default device displayed. Valid output closures for the

parallel port are as follows:

Pins 1, 14, 16, and 17 are output closures and will require a “pull up” circuit to drive a relay.

Logic for the output closure can also be based on a “low” or “high” condition.