Technical information

V4 Logger User Guide 46

V4 Logger

Feed Creation - Continued:

Input Closures

Output Closures

Split Closure

Pause Closures

Switcher/Serial Devices

Options

Input Closures

Click on the box directly to the right of the Start or Stop display field to select from a list of

available and previously configured closure devices.

The parallel port (if present or enabled) is the default device displayed. Valid input closures for the

parallel port are as follows:

Pins 2 – 13 and 15 are input closures. (Dry contact)

I have configured a DIO 24H card from Measurement Computing for this example and it is available

through the drop down list along with the parallel port as a valid closure device.

The DIO 24H card provides 16 input and 8 output closures.

NOTE: The DIO 24H card can only provide “static” or “latched” output closures. Check with the

device that you are sending output closure to with DIO card and ensure that static or latched closures

can be accepted versus momentary.