Technical information

V4 Logger43

V4 Logger

Feed Creation - Continued:

Audio Properties

The above screen shot shows the default display prior to configuring audio parameters. The channel

displayed will be the default Windows channel setup under Playback and Record options. This setting

is located in the Control Panel under Sounds and Audio devices and located under the “Hardware”

tab. Select the dropdown to the right hand side of the Channel field to select any available channel.

The above screen shot shows 8 available devices as I have configured an 8 channel Logger for this

example. 8 Stereo channels could also have been configured or a combination that would add to 8

devices and would display three choices per device if enabled.

Format

There are 7 formats of audio recording type available through Logger and can be accessed in the

dropdown tab directly to the right of the Format field.

NOTE: You will require a proprietary Dolby AC3 decoder to play audio recorded under this format.

This is generally used for audio recorded underneath video. MPEG layers 1,2 and 3 are available

along with PCM, Real and WMA format.