Technical information

V4 Logger User Guide 36

V4 Logger

Configuration - Continued:

Enable the “Set system clock” if you have selected a time server and this will allow the user to select

the time when the Logger PC updates, the time window, and the additional of a time offset is desired.

The “Set clock” drop allows for two time update choices:

The Time window or “if more the x seconds out” drop down is user definable from 0 to 60 seconds.

The “Apply an offset of x seconds” is user definable from -100 to 100 seconds with 1 second

increments.

Enable the “Provide NTP service is you are update with an NTP based time server and you wish to

use the Logger PC as the time base.

The “Edit” and Remove” buttons will highlight once you have added a Time server.