Technical information

V4 Logger User Guide 24

1.5 Configuration

V4 Logger

Configuration :

The above screen shot shows the “Status” screen immediately following the start of the Logger

software. The example displayed is an 8 channel version using an Echo Layla 3G 4 Stereo/8 mono

audio device. Channels that are not viewable directly from the main status tab can be accessed by

using the scroll bar on the right hand side of the screen. The “status” tab is the default main screen

and displays current recording activity or inactivity. The audio devices/channels are displayed in the

left hand column and each meter represents each channel of the Logger you have configured or

purchased.

Example:

8 meters displayed in the left hand column would signify an 8 channel Logger. The meters are visible

at all times regardless of the “tab” selected. If you have only configured 6 of the available 8 channels

in an 8 channel Logger application, then only 6 meters will be displayed.

NOTE: The meters will only display activity under a scheduled record. The meters will not display

any levels unless a feed and scheduled item has been created. It is recommended that a full time

logging schedule is created when setting or adjusting levels on a specific feed element.

File

At the top right hand corner of the status (main) screen there is a “File” drop down that will allow the

user to select “Exit” to quit the Logger program.