Technical information

V4 Logger User Guide 22
© 2010 OMT Technologies
1.4.5 AXIA AoIP Systems Interface Module
Logger 4.1.2 and higher now have the ability to interface with both GPIO and audio routing the AXIA
AoIP system.
A separate module/installer is now available and can be purchased through sales at
[e-mail] or phone [phone].
Once the AXIA Interface module is installed, an additional device listing for the AXIA device will
appear under the "Hardware" tab of the Logger Configuration page. The port is pre-defined (9500)
and the user simply place the IP address of the AXIA to provide communication.
IMPORTANT: AXIA must be set to 48,000 Sample Rate under Audio Devices.