Technical information

V4 Logger13
© 2010 OMT Technologies
Version 4 LOGGER
Installation – Continued:
The Network Configuration allows what name is to be displayed through the HTML Interface, what
port to assign, and enabling the HTTP service in Logger.
If you do not plan on using the HTML Interface simply uncheck the HTTP Web Services Active box.
This will prevent anyone from accessing the Web Browser through Logger. The port value can be
changed to any suitable or required value if you do not wish to use port 80. Click “Next” when
complete.
Message Logging Options
It is always a good idea to enable all five error messaging options, especially with a new installation
for troubleshooting purposes. Enabling all messaging will display messages showing closure tallies,
IP addresses of people accessing the HTML page, schedule and device errors, etc. By default, only
“Log Error Message” is enabled.
The Event Log location is set to the working folder for iMediaLogger. You can select the desired
location (if different by selecting the “Browse” button and navigate through Windows Explorer to a
suitable location.
Click “Next” when complete.