Technical information

V4 Logger User Guide 134

Click “Apply” then “OK” then restart the Logger application.

Upon the restart of the Logger application, go to the “Event” tab from the main Logger

screen and note the start up sequence outlined in text display.

You should see a valid WDT 500 device enabled. If there is an issue with the WDT 500

card installation or the Kontron driver, you will see this in the Event viewer.

schedule manager started OK

07/12/24 - 10:57:32 - [STATUS]Archive Manager::Starting

07/12/24 - 10:57:33 - [STATUS]AutoFileTrim::Stop() succeeded

07/12/24 - 10:57:33 - [STATUS]AutoFileTrim::Start() succeeded

07/12/24 - 10:57:56 - [STATUS]Watchdog: Inactive, possibly missing DLLs

07/12/24 - 10:58:50 - [STATUS]*************** iMediaLogger Booting

And a correct installation:

schedule manager started OK

07/12/24 - 10:57:32 - [STATUS]Archive Manager::Starting

07/12/24 - 10:57:33 - [STATUS]AutoFileTrim::Stop() succeeded

07/12/24 - 10:57:33 - [STATUS]AutoFileTrim::Start() succeeded

07/12/24 - 10:57:56 - [STATUS]Watchdog: Start() succeeded

07/12/24 - 10:58:50 - [STATUS]*************** iMediaLogger Booting

For further assistance and contact information see the following page. We hope you find

this guide useful brought to you by the OMT support team.