Technical information

V4 Logger User Guide 126

The following screen shot to the left shows the contents of an HP Compaq 5700 series

computer with card installed only (no wiring).

After you have removed the side cover from the computer, install the WDT 500 card in a

suitable location. This computer also contains an ASI 5111 sound card.

The reset cable that is supplied with the WDT 500 has been looped over the cable hold

on the air flow cover of the PC until ready for connection.

The PCI WDT 500 card supplies the reset cable and a “Scotchlock” or “Wire clamp” for

connecting to the reset wire of your computer.