Technical information

V4 Logger User Guide 120

“Best of Shows” using the Pause feature.

Create a new feed as with the example above. Select the OMT Database and

appropriate category under File Properties of the Feeds page. Unfortunately, you must

have an OMT database/automation system to use the “Pause” feature.

Select an appropriate Input Closure value on your SS4.2/SS8.2. I have chosen Input

Closure 4 for this example to be “active” when low and to “pause” when high.

Select the Schedule tab from the main Logger window and right click in the Daily window

and select “Edit”. I want to record between 6 AM and 10 AM only PLUS I want to have

only the audio that was activated by closure. I will have one single audio files recorded

over the four hours that will most likely be well under an hour in length since it will only

be the talent and no dead air spots over the four hours scheduled.