Technical information

V4 Logger113

OMT Database Recordings

You can configure Logger to record directly to the OMT database if you have a Media

Touch automation system (ONAIR software and audio assets and database). Prior to

configuring your logger software, you must map an “O” drive on the Logger computer to

the root of your server or ONAIR computer’s “O” drive. Verify that your Logger

computer contains all appropriate user accounts (MTS, OPLOG, Logger, etc.) with

Administrator level rights and you have full access to the “O” drive located on your

server or ONAIR computer.

Once you have a valid “O” drive, launch Logger select “Tools” and “Configure” from the

main Logger window. The default tab displayed will be “Files”.

At the bottom of the “Files” window, enable the “Connect To OMT Database” and use the

browse box to the right of the file path to navigate through Windows Explorer to the “O”

drive. Double click on the Projdata.dbf file as this will place the location directly in the file

path. Click “Apply” then “OK” when finished.

We will need to create a new feed to access the OMT Database. I have called the new

feed “TEST2” in the example below.