Technical information

V4 Logger109

Click “OK” when finished and you should be able to see your configuration for both “On

Start” and “On Stop” as the screen shot below.

We have successfully assigned audio routing. Now we can assign closures to the BTools

switcher. Select the ”Input Closures” tab from the main Feeds page. You can also

assign Output closures in the event you need to trigger an external device. Select the

“Broadcast Tools SS8.2” from the available list under Input Closures.

In the screen shot above, I have select Input 1 when the closure goes “low”. Input 1

would represent PIP 1 on the wiring pin outs for both SS4.2 and SS8.2. PIP 2 represents

2, PIP 3 represents 3, etc.

Click “OK” when complete and you should see the configuration displayed in the “On

Start” field.