Technical information

V4 Logger User Guide 108

Now select the appropriate output of the BTools Audio switcher that is input into the

sound card of your Logger recording device. Output 1 of the BTools is wired into the

single channel sound card input for this example. You can choose between 1, 2, or all

(both).

Click “OK” when complete and you should see the configuration you have just set show

up in the “On Start” window.

Next, we will configure the “On Stop” section by selecting the “Edit” button on the same

row. This time we will select “Mute” instead of “Assign” as we want the channel to

remain silent or inactive when not in use.