Technical information

V4 Logger107

The “TEST” feed will be scheduled under the “Logging” window of the Schedule tab as it

will be a mic skim for anytime the mic is “live”. This example assumes that the audio

source would be the “audition out” from the console. This provides for flexibility in what

is recorded into the BTools switcher since the announcer can enable any audition channel

to be sent to a specific input of the BTools switcher and control of the recording is

accomplished through the start/on button for the mic fader. The announcer can take the

mic fader off of PGM and AUD on their console and use the start/on button to record any

source that has AUD enabled on the console.

To begin, select the “Switcher/Serial Devices” from the Feeds page and click on the

“Edit” button under “On Start”. The following Window should appear.

Under “Device Settings”, select “Broadcast Tools SS8.2” from the drop down list.

Next, enable “Operation 1” under “Assign” and select the appropriate input of the BTools

switcher input channel. If you are using a SS4.2 there will only be four inputs and use

only input 1 through 4. The SS8.2 has 8 inputs and that is why the drop down shows 8

available input channels.

The “Operation 2” field allows for a second function on start or stop.