Technical information

V4 Logger User Guide 104

NOTE:

The “Split” function from the Feeds section of Logger requires an OMT database. This

feature cannot be used with a stand-alone Logger. It must be used with an OMT

automation system/database.

Select the “Hardware” tab along the top of the configuration screen to select and

configure your BTools SS4.2/8.2 Audio Switcher.

Click on the enable box for “Enable Switcher” and select “BTools SS8.2” if you are

configuring either a SS4.2 or a SS8.2 switcher. Select the available COM port under the

“Port” settings. The default rate is 9600. You can select up to 38400 from the drop

down list.

Important:

If you change the baud rate, the same rate MUST be applied to Windows, the Logger

software and the BTools audio switcher to work correctly.