Technical information

V4 Logger103
© 2010 OMT Technologies
Logger Software Configuration
The main screen of your Logger software will appear similar to the example below.
To configure your iMediaLogger software for use with a BTools Audio switcher, go to the
“Tools” drop down at the top left corner of the main screen.
The following configuration screen should appear with the “Files” tab information being
displayed by default.
The “Default Destination” is the location that the local audio file recordings will be sent or
“stored”. If your Logger is part of an OMT automation system, you can enable the
“Connect to OMT Database” to allow for pre-recorded Satellite shows and direct to
database recordings.