User's Guide

essary, with recommended dimensions of
102x102mm and R20 rounded edges.
• Fasten the Triton with 4 M5 bolts to ensure
good position, and for easy swap ability add
two dowel pins.
Figure 1: Mounting the sensor
Figure 2: Adding dowel pins for accurate place-
ment
• Connect power cable
Port/connection
Power usage, voltage, amp limit 10A
• Connecting ethernet cable
Port connection type
• Recommendations:
Mount as close as possible to the loca-
tion where you want to know position
Mount at location where the sensor
window will remain clean, e.g. do not
mount close to the wheels of the AGV
Operation
Connect your sensor to the ethernet (default IP
address: 192.168.0.10) and connect to it with
the Accerion control center user interface. Your
sensor is now ready for use.
Maintenance
• Keep the sensor window clean as much as
possible.
• To clean the sensor window
Remove dirt and dust with clean air
Degrease with a clean lint free IPA wipe
Dismantle and environment
The sensor, accessories and packag-
ing should be sorted for eco-friendly re-
cycling. Do not dispose in household
waste.
2