Assembly

Page 4 / 7
X8
L
L
Residential Use Only Made in Viet Nam / Fabriqué au Vietnam / Hecho en Vietnam
Step 3.
There are two Back Panels (Part L). Add one of the back panels to the back of the frame at
the bottom, aligning the pre-drilled holes. Insert Bolts (Part M) into the holes and turn
clockwise to tighten. Do not over tighten. Remove the wing wrench from the bolts when
finished. Now add the other Back Panel (Part L) on top of the other back panel,and secure
using the Bolts (Part M) as you did previously.
1
DESCRIPTION / DESCRIPCIÓN/Décription : GLAM CAMPAIGN 5 DRAWER DRESSER
ITEM NO. / ARTICULO NO : DS-462-002
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE