Assembly

ManualsBrandsAccentrics Home ManualsDressersDresser White

Page 1 / 7

PARTS LIST / LISTE DES PIECES / LISTADE PIEZAS

X1 Top panel

X1 Left side panel

X1 Right side panel

X1 Bottom panel frame

X28 Bolt Ø

''*23mm

X28 Perno Ø

''*23mm

X28 Boulon Ø

''*23mm

X4 Support rail front

X5 Drawer front

X5 Left side drawer

X5 Right side drawer

X5 Drawer back

X5 Bottom drawer

X2 Back panel

Residential Use Only Made in Viet Nam / Fabriqué au Vietnam / Hecho en Vietnam

DESCRIPTION / DESCRIPCIÓN/Décription : GLAM CAMPAIGN 5 DRAWER DRESSER

ITEM NO. / ARTICULO NO : DS-462-002

Summary of content (8 pages)

PAGE 1
PARTS LIST / LISTE DES PIECES / LISTADE PIEZAS ITEM NO.
PAGE 2
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO. / ARTICULO NO : DS-462-002 DESCRIPTION / DESCRIPCIÓN/Décription : GLAM CAMPAIGN 5 DRAWER DRESSER Step 1. Insert the hardware on support rails (Part E) into the R/L Side Panels (Parts B&C). Pull up on the support rails while pressing down on the side panels to secure them into place.Make sure the support rails are flush with the edges of the side panels.
PAGE 3
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO. / ARTICULO NO : DS-462-002 DESCRIPTION / DESCRIPCIÓN/Décription : GLAM CAMPAIGN 5 DRAWER DRESSER Step 2. Insert the Side Panels (Parts B&C) into the Bottom Frame (Part D). Slide the panels forward toward the front of the base to secure in place. For best results, it may be helpful to turn the base and panels over on their face on a soft dry surface.
PAGE 4
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO. / ARTICULO NO : DS-462-002 DESCRIPTION / DESCRIPCIÓN/Décription : GLAM CAMPAIGN 5 DRAWER DRESSER Step 3. There are two Back Panels (Part L). Add one of the back panels to the back of the frame at the bottom, aligning the pre-drilled holes. Insert Bolts (Part M) into the holes and turn clockwise to tighten. Do not over tighten. Remove the wing wrench from the bolts when finished.
PAGE 5
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO. / ARTICULO NO : DS-462-002 DESCRIPTION / DESCRIPCIÓN/Décription : GLAM CAMPAIGN 5 DRAWER DRESSER Step 4. Make sure that the hardware in side panels(Part B&C) are in the open position as indicted by the straight arrow in the diagram. Add the top to the base making sure that the male hardware is completely inserted into the female hardware in Top panel (Part A) . Secure the top by turning the switches to the locked position.
PAGE 6
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO. / ARTICULO NO : DS-462-002 DESCRIPTION / DESCRIPCIÓN/Décription : GLAM CAMPAIGN 5 DRAWER DRESSER Step 5. Making sure that drawer glides are facing out,and the groves are facing in,insert drawer side panels (Part G&H) into the drawer front (Part F). Press downward on the drawer side to secure them into place. Make sure that the groove in the drawer front is aligned with the grooves in the side panels.
PAGE 7
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO. / ARTICULO NO : DS-462-002 DESCRIPTION / DESCRIPCIÓN/Décription : GLAM CAMPAIGN 5 DRAWER DRESSER Step 6. Align the glides on the drawer with the glides in the cabinet. Press forward to engage the drawer glides. Slide the drawer in and out to get a smooth glide. Close the drawer completely.
PAGE 8