PARTS LIST / LISTE DES PIECES / LISTADE PIEZAS ITEM NO. / ARTICLE NO .
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO . / ARTICLE NO . / ARTICULO : DS-462-001 Description/ La Description /Descripción : GLAM CAMPAIGN 6 DRAWER DRESSER Step 1. Insert the Front Support Rail (Part F) into the Partition Panel (Part D). Insert the Front Support Rails (Part F) into the hardware in Side Panels (Part B&C). Pull upward toward the front of the cabinet to secure in place. Make sure that the front support rails are flush the front of the side panels.
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO . / ARTICLE NO . / ARTICULO : DS-462-001 Description/ La Description /Descripción : GLAM CAMPAIGN 6 DRAWER DRESSER Step 2. On a soft dry surface,turn Bottom Frame (Part E) over with bottom facing up Add Leg (Part N) by inserting into the holes and turning clockwise. Do not over tighten the leg to avoid stripping the bolts. Note that the middle support leg can break if you drag the dresser when moving it to it's final location.
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO . / ARTICLE NO . / ARTICULO : DS-462-001 Description/ La Description /Descripción : GLAM CAMPAIGN 6 DRAWER DRESSER Step 3. For best results,turn the assambled parts B,C,D,F face sown on a soft dry surface. Also turn the Bottom Panel (Part E) front side down to the floor. Align the hardware on the Left/Right Side Panels & Partition Panel (Parts B,C,D) with female hardware in Bottom Frame (Part E).
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO . / ARTICLE NO . / ARTICULO : DS-462-001 Description/ La Description /Descripción : GLAM CAMPAIGN 6 DRAWER DRESSER Step 4. Insert the Back Panel (Part M) into the back of the cabinet aligning the pre-drilled holes. Insert Bolt (Part 1) into the holes and turn clockwise to tighten. Do not over tighten. Remove wing wrench from bolt when you are finished.
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO . / ARTICLE NO . / ARTICULO : DS-462-001 Description/ La Description /Descripción : GLAM CAMPAIGN 6 DRAWER DRESSER Step 5. Make sure that the locking hardware switches in Panels (Part B,C,D) are in the open position indicated by the straight arrow in the diagram. Align the hardware in Top Panel (Part A) with the hardware in the panels and lower into place.
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO . / ARTICLE NO . / ARTICULO : DS-462-001 Description/ La Description /Descripción : GLAM CAMPAIGN 6 DRAWER DRESSER Step 6. Making sure that drawer glides are facing out, and the grooves are facing in, insert Drawer Side Panels (Parts H&I) into the Drawer Front (Part G). Press downward on the drawer side to secure them into place. Make sure that the groove in the drawer front is aligned with the grooves in the side panels.
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE ITEM NO . / ARTICLE NO . / ARTICULO : DS-462-001 Description/ La Description /Descripción : GLAM CAMPAIGN 6 DRAWER DRESSER Step 7. Align the glides on the drawer with the glides in the cabinet. Press forward to engage the glides. Slide the drawer and out to get smooth glide. Close the drawer completely.
