Assembly

Step 4
Page 4/6
Make sure that the locking hardware switches in
Panels (C,D,E,F) are in the open position indicated
by the straight arrow in the diagram. Align the
hardware in Top Panel (Part A) with the hardware
in the panels and lower into place. Making sure that
the male hardware is complete inserted into the
female hardware in the top, secure the top in place
by turning the switch as indicated by the curved
arrow in the diagram.
Insert the back panel (Part M) into the back of the
cabinet aligning the pre-drilled holes. Insert Bolts (Part 1)
into the holes and turn clockwise to tighten. Do not over
tighten. Remove wing wrench from bolt when you are
finished.
Residential Use Only Made in Viet Nam / Fabriqué au Vietnam / Hecho en Vietnam
ITEM NO . / ARTICLE NO . / ARTICULO NO : DS-D314-100
Description/ La Description /Descripción : FOUR DOOR CANE CONSOLE
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE