User's Guide

Accent 1000 User’s Guide-Empower 30
Removing or Replacing the Device Frame
Your device came with a frame mounted on it. If you need to remove or
replace the frame, follow these instructions.
Removing the Frame
1. If you are using a Keyguard or TouchGuide, remove it from the
frame. See “Removing the Keyguard” on page 35 or “Removing the
TouchGuide” on page 37.
2. Using a Phillips screwdriver, remove the screws that secure the frame
to the device. side.
Important! If you are replacing the frame, set the screws aside. You
will use them to reattach the new frame. If you are not replacing
the frame, store the screws in a safe location in case you later
decide to reattach the frame.
Loose screws could be a choking hazard.
3. Grasp one side of the frame and pull it loose from the device.
Hint: You may want to use a flat-head screwdriver or similar tool
to gently lift the side and bottom tabs on the back of the device.
DRAFT