User's Guide

Accent 1000 User’s Guide-Empower 24
Removing or Reattaching the Handle
To remove the handle from the device:
1. Using a Phillips screwdriver, remove screws that hold the handle in
place.
2. Pull the handle away from the device.
3. If you are not going to mount a NuPoint module, it is important to
attach the port cover to protect the mini USB connector. See
“Attaching the Top Port Cover” on page 25.
To reattach the handle:
Remove the port cover or NuPoint module, line up the holes in the handle
with the holes on the back of the device, and insert the screws.
DRAFT